All Completes

Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete
Koastal Pin tail - 38" Longboard Skateboard - Complete

Koastal Pin tail - 38" Longboard Skateboard - Complete

Regular price $ 179.99
/

You can never go wrong with a Pin Tail. Our 38" Pin Tail has a clean fresh look to it. With its wedged Aspen and Mahogany stringers along with the dyed blue maple this board will turn heads as you cruise by. Not only does this board look good it also rides extremely well. This board has a smooth ride and carves really well. Its the perfect sidewalk surfer. Boards that are similar is the Pin Tail Deluxe and Meat Loaf Deluxe.

Deck Info:

Dimensions: L – 38” * W – 8.75” 
Wheel Base: 29.5"
Wood: Aspen, Mahogany, and Blue dyed maple veneers. The core of this board is 6 ply maple.
Bottom: Natural Maple dyed blue veneer
Shape: Slight concave and little camber
Grip: Spray Crystal Grip


Standard Complete setup: 
Hardware: Standard mounting hardware.
Bearings: Psycho Swiss Tech
Wheel: Coyote Alpha Wheels - 70mm / 78a  (*Wheel color will vary)
Trucks: Revenge Alpha I

VIDEOS:


Cart
Koastal Rasta - 34" Longboard Skateboard Complete
Koastal Rasta - 34" Longboard Skateboard Complete

Koastal Rasta - 34" Longboard Skateboard Complete

Regular price $ 179.95
/

Sold as complete and ready to ride!

The Rasta has very slight concave and has a full kick tail. It measures 34" in length and is a great board for just about anything. The board is not that big so you can take it every where you go and it wont get in the way. Setup with Revenge trucks this board is great for carving and cruising. Has a very quick response which makes for a great city board. Its also great board for making those short runs down to the store or to go check the surf.


Deck Info:

Dimensions: L – 34” * W – 9.25”

Wheel Base: 24.5"
Wood: Mahogany, and Green, Red, Yellow dyed maple veneers. The core of this board is 5 ply.
Bottom: Green dyed maple veneer.
Shape: Flat board with full kick tail.
Grip: Spray Crystal Grip

Trucks:  Revenge alpha 1

Wheels: Coyote 70mm Alpha 

Please note: *Wheel colors will vary due to availability

Videos

 

Cart
Koastal Two Face - 37" Longboard Skateboard - Complete
Koastal Two Face - 37" Longboard Skateboard - Complete
Koastal Two Face - 37" Longboard Skateboard - Complete
Koastal Two Face - 37" Longboard Skateboard - Complete
Koastal Two Face - 37" Longboard Skateboard - Complete

Koastal Two Face - 37" Longboard Skateboard - Complete

Regular price $ 179.99
/

 Sold as complete and ready to ride!

The Two Face was designed to be a perfect all around board. Its great for cruising, carving, sliding, and slight hills. Its not to big or to small its that perfect size longboard and with the kick tail and concave you can really step it up with this board. If you are looking for that great all around board the Two Face is for you. The board that is similar/same as the Two Face is the Meat Loaf 37 board. It comes out of the same mold and has the same shape just different stringer pattern.

Deck Info:

Dimensions: L – 37” * W – 9.5”
Wheel base: 25"
Wood: Aspen, Mahogany, and Orange/Yellow dyed maple veneers. The core of this board is 6 ply maple.
Bottom: Natural Maple dyed brown veneer
Shape: Slight concave, little lift in the nose, full kick tail.
Grip: Spray Crystal Grip

Standard Complete setup: 
Hardware: Standard mounting hardware.
Bearings: Psycho Swiss Tech
Wheel: Coyote Alpha Wheels - 70mm / 78a (*Wheel color may vary)
Trucks: Revenge Alpha II w/ Medium Bushings
Videos


Cart
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete
Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete

Koastal Wave Dancer - 56" Longboard Cruiser Skateboard - Complete

Regular price $ 215.99
/

The Wave Dancer was designed to be the ultimate cruiser board. Mostly made from mahogany the Wave Dancer has a very dark rich look to it. So not only will the size of the board be a head turner but the wood stringer work will also catch people's attention. It has a 12 ply core making the board pretty stiff but will still have some life to it depending on the person's weight. Setup with Revenge trucks you can turn this board incredibly well. It turns on a dime and you can make some really nice heavy carves. 

Deck Info:

Dimensions: L – 56"” * W – 10.5”
Wheel Base: 44"
Wood: Mahogany and Aspen. The core of this board is 12 ply.
Bottom: Natural
Shape: Flat pressed, Pin nose that comes down to a square tail
Grip: Spray Crystal Grip

**Rated for 300lbs (board will have some flex) - Board can handle a higher weight but will have more flex to it.

Standard Complete setup:
Hardware: Black hex head mounting hardware.
Bearings: Standard Bearings
Wheel: Coyote Prowler Wheels - 72mm / 78a (*Wheel color may vary)
Trucks: Revenge Alpha II
Riser: 1/8" Shock Pad
Videos



Cart
Pickle Complete - Black/Pink
Pickle Complete - Black/Pink

Pickle Complete - Black/Pink

Regular price $ 139.99
/

7.5" x 28.75"
5" Speed Trucks
.5" Wedge Risers
Abec 7 Bearings
60mm 78A wheels
8 ply Rocker Concave

Cart
Riviera Arrowheads Complete - 8.75"x32.25"
Riviera Arrowheads Complete - 8.75"x32.25"
Riviera Arrowheads Complete - 8.75"x32.25"

Riviera Arrowheads Complete - 8.75"x32.25"

Regular price $ 115.00
/

This deck was built in honor of all the skaters that paved the way for modern street skating. It’s shape brings on nostalgia but is fully functional for today’s skate everything vibe. The hard edge on the top rail gives the board a steep feeling without losing a mellow comfort you expect when you’re cracking full speed ollies. ‘Wise’ put down some creative characters that give it a classic look on a raw veneer and keep the board on point!

Completes Includes:

Paris street trucks

1/4 Psycho Riser

Divine wheels 64mm 84a for outdoor (color may vary depending on avail)

abec 5 bearings

Cart
Riviera Dineh Complete - 8.75"x37"

Riviera Dineh Complete - 8.75"x37"

Regular price $ 189.95
/

Dineh is a smaller road companion to its Mother Board ‘Heta.’ It has similar features with symmetrical cradled rails and pockets for your feet as well as a nose and tail kick that will allow for tricks and street skating functions. The smaller deck allows for more agile turning and easier slides at moderate speeds. Embrace your future with Dineh and roll with a higher calling on this board that is built for tearing up the streets.

  • Wheelbase: 25.5"
  • Paris Street Trucks - 180mm
  • Coyote Wheels - 72mm / 78a Color may vary depending on avail.
  • Abec 5 Speed Bearings
  • Clear Griptape
Cart
Riviera Fishstick V3 Complete - 9.0"x31.5"

Riviera Fishstick V3 Complete - 9.0"x31.5"

Regular price $ 149.95
/

The ‘Fish Stick’ has become a staple in our ‘Combine’ collection of boards. This is our third color-way of Ty Williams’ beautiful and simple artwork. There is no limit to the use of this skateboard. The park, the streets, the ramp, the ditch, and the pool: ride this board anywhere and find satisfaction.

Complete includes:

Paris Street Trucks

60mm coyote wheels 78a for outdoor Color may vary depending on avail.

1/2 Psycho Riser

Abec 5 Psycho bearings

Cart
Riviera Float On Complete - 8.25" x 29"
Riviera Float On Complete - 8.25" x 29"

Riviera Float On Complete - 8.25" x 29"

Regular price $ 139.95
/

Riviera Float on Complete is a great all around cruiser.  Perfect size to take with you everywhere.  

Built with quality Paris trucks and Coyote wheels alpha.  There is no need to change out anything.  Its ready to ride!

 

Cart
Riviera Gnarats Complete - 9.80"x33.0"
Riviera Gnarats Complete - 9.80"x33.0"

Riviera Gnarats Complete - 9.80"x33.0"

Regular price $ 99.99
/

The Riviera Gnaratz Complete Skateboard offered with a double wheelbase.  Awesome for an all around skateboard.   This board is highly recommended for many kinds of terrain.  Just shipped to your door, ready to ride.

9.8" x 33.0"

*The 15.5″ wheelbase is really fun for get’n sketchy in the streets or your favorite park.

*The 16.5″ wheelbase makes it really stable for some rad downhill alleys, big ditches or free ride/slide jam sessions.

Offered:

  1. Gripped
  2. Paris Street Trucks – 169mm
  3. Divine wheels 
  4. Abec 5 Psycho Bearings



Cart
RIVIERA GOLDEN JELLYFISH COMPLETE - 8.5" x 37"
RIVIERA GOLDEN JELLYFISH COMPLETE - 8.5" x 37"

RIVIERA GOLDEN JELLYFISH COMPLETE - 8.5" x 37"

Regular price $ 169.95
/

This classic longboard pintail shapes pays homage to our surfing roots and was created for cruising at moderate speeds.

You can cross-step your life away while sidewalk surfing or just push around town with a giant smile on your face.

Hand crafted and made right here in our woodshed, USA.  The artwork hand screened with Gold ink.  Hand gripped with our traditional crystal grip.  This is a crafted gem.

  • Coyote Slider 65mm Wheels (wheel color may vary depending on availability)
  • Paris Trucks 180mm Black
  • Psycho Abec 7 bearings
  • Crystal Grip

 

Cart
RIVIERA GOLDEN JELLYFISH LARGE COMPLETE - 9" x 42"
RIVIERA GOLDEN JELLYFISH LARGE COMPLETE - 9" x 42"

RIVIERA GOLDEN JELLYFISH LARGE COMPLETE - 9" x 42"

Regular price $ 169.95
/

This classic longboard pintail shapes pays homage to our surfing roots and was created for cruising at moderate speeds.

You can cross-step your life away while sidewalk surfing or just push around town with a giant smile on your face.

Hand crafted and made right here in our woodshed, USA.  The artwork hand screened with Gold ink.  Hand gripped with our traditional crystal grip.  This is a crafted gem.

  • Coyote Alpha 70mm Wheels (color may vary depending on avail)
  • Paris Trucks 180mm Black
  • Psycho Abec 7 bearings
  • Crystal Grip

     

    Cart
    Riviera Heta Complete - 9.5"x40.5"

    Riviera Heta Complete - 9.5"x40.5"

    Regular price $ 189.95
    /

    Born into our ‘Top Shelf’ collection, Heta is built from maple and glass and was created to suit your freedom seeking passions. Push and carve your way around town with high spirits and an open mind to slide and utilize the symmetrical nose and tail kicks that allow for busting tricks or just smashing through rugged street conditions with ease. The 13” long spine set dead center of the deck creates pockets for your feet to remain planted firmly for any aggression you might express along your journey.

     

    • Wheelbase: 27.5"
    • Paris Street Trucks - 180mm
    • Coyote Wheels - 72mm / 78a
    • Abec 7 Speed Bearings
    • Clear Griptape
    Cart
    Riviera Word To The Wise Complete- 9.5"x41"

    Riviera Word To The Wise Complete- 9.5"x41"

    Regular price $ 189.95
    /

    Word To The Wise is a symmetrical deck cut from a ‘taco mold’ that features artwork from our friend ‘Wise.’ This board is perfect for pushing great distances as well as bombing hills and alleys at moderate speeds or just kicking around town. The shape along with its bamboo and glass construction is a perfect combination for comfort and stability on any session.

     

    • Wheelbase: 28"
    • Paris Street Trucks - 180mm
    • Coyote Wheels - Prowler 72mm / 78a (Color may vary depending on avail)
    • Abec 5 Speed Bearings
    • Clear Griptape
    Cart
    Schmitt Stix Ripsaw Mini Cruiser Complete Red - 8.75" x 28.4"

    Schmitt Stix Ripsaw Mini Cruiser Complete Red - 8.75" x 28.4"

    Regular price $ 99.95 Sale price $ 89.99
    /

    Schmitt Stix Ripsaw Mini Cruiser.  Just pull it out of the box, jump on it and cruise the streets.  Great size to carry, throw in the car or back pack.  

    Deck size 8.75" x 28.4"

    Black grip tape applied

    Tri Star trucks 129mm : black

    Psycho Abec 7 Bearings

    1/2 Wedge red riser

    Wheels:  60mm Coyote for all terrain on the streets.

     

    Cart
    Koastal T Band 47" Longboard Cruiser Top
    Koastal T Band 47" Longboard Cruiser Bottom
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete
    T-Band 47" Longboard Cruiser - Complete

    T-Band 47" Longboard Cruiser - Complete

    Regular price $ 179.99
    /

    Complete and ready to ride!

    The T-Band has been in the Koastal line since the start. This board use to be made mostly from Purple heart but we have recently switch it to Mahogany. This board has a nice dark rich look to it and very simple stringer pattern. Its super easy to ride and a very stable ride. We recommend this board to everyone looking for a nice cruiser carving board. Boards that have a similar ride to the T-Band is the Classic, Pearl, Woody, Current, and Gun. 

    Deck Info:
    Dimensions: L – 47” * W – 9.25”
    Wheel Base: 38"
    Wood:  Mahogany, with a quarter inch Aspen and red dyed maple veneers running down the center.
    Bottom: Natural
    Shape: Full rocker nose to tail.
    Grip: Spray Crystal Grip

    Standard Complete setup: 
    Hardware: Standard mounting hardware.
    Bearings: Psycho Swiss Tech
    Wheel: Coyote Prowler Wheels - 72mm / 78a (*Wheel color may vary)

    Trucks: Revenge Alpha II w/Medium Bushings

    Videos



    Cart
    The Drifter II 60" Longboard Cruising Skateboard - Complete

    The Drifter II 60" Longboard Cruising Skateboard - Complete

    Regular price $ 249.99
    /

    DRIFTER II is here!! Same shape and size as the original Drifter just different stringer line up.

    Its a nice big cruiser board but handles like a shorter longboard. With Revenge Trucks this board carves like a dream and you can really dig into the turns. The core is 12 ply plus the addition of the wood stringer top sheet consisting of Mahogany, Aspen, and Purple Heart. With its longer wheel base you will have some flex but not an extreme flex. The flex gives the board a nice comfortable ride and basically acts like shocks in a car when going over bumps and cracks it helps smooth the ride out. Also with the flex you can really pump the board up and down the street which is a nice feature for such a long board.

    Deck Info:
    Dimensions: L – 60"” * W – 11”
    Wheel Base: 48"
    Wood: Mahogany, Aspen, and Purple Heart. The core of this board is 12 ply.
    Bottom: Natural
    Shape: Flat pressed, Round nose that comes down to a diamond tail
    Grip: Spray Crystal Grip
    **Rated for 280lbs (board will have some flex) - Board can handle a higher weight but will have an extreme flex. 

    Standard Complete setup: 
    Hardware: Standard mounting hardware.
    Bearings: Psycho Swiss Tech
    Wheel: Coyote Prowler Wheels - 72mm / 78a (*Wheel color may vary)
    Trucks: Revenge Alpha II w/ Medium Bushings
    Riser: 1/8" Shock Pad

    Videos 





    Cart
    Vision Grigley Mini Cruiser Complete - 8"x28.75"

    Vision Grigley Mini Cruiser Complete - 8"x28.75"

    Regular price $ 99.95 Sale price $ 89.99
    /

    Vision MG Mini Cruiser Complete

    • Width: 8"
    • Length: 29.75"
    • Gripped
    • 129mm Tri-Star Trucks: Black
    • Conical 60mm Wheels: Black
    • 1/2" Wedge Risers
    • Psycho ABEC 7 Bearings
    Cart
    Vision Groholski Heavy Metal Complete Skateboard- 29.75" x 9.75"
    Vision Groholski Heavy Metal Complete Skateboard- 29.75" x 9.75"

    Vision Groholski Heavy Metal Complete Skateboard- 29.75" x 9.75"

    Regular price $ 165.95
    /

    Pro Model: Tom Groholski Heavy Metal

    Vision classic Re-Issue made to the exact specifications of the original design and it's still being made by the same company that made them! It's hard to go wrong when the original company is the still making the board from the 80's!

    29.75" x 9.75"

    Wheelbase: 15 7/8"

    -Tracker Trucks Axis 161mm

    -Psycho Rails

    -Psycho Riser 1/2"

    -Bearings Abec 7

    -Blurr wheels 60mm 96a (Color of wheel may vary depending on availability)

    Cart
    Vision Groholski Skeleton Pink Stain Complete - 8"

    Vision Groholski Skeleton Pink Stain Complete - 8"

    Regular price $ 99.95
    /

    Shred in Groholski Skeleton with the Vision 8" skateboard complete. A favorite graphic from Vision, while the moderate concave profile is perfect for flipping tricks of all kinds or just cruising. Abec 7 bearings carry speed insanely well from the park to the street, and the 101a durometer wheels fend off flat spots with ease.

    • 8" Skateboard Complete from Vision
    • 7-ply Canadian maple construction
    • Moderate concave
    • Moderate pitched and slightly tapered kick tails
    • 5.25" Psycho trucks
    • 52mm 101a Wheels
    • Abec 7 bearings
    • Width: 8.0"
    • Length: 31.5"
    • Wheelbase: 14.0"
    • Made in USA at our woodshop
    • Note: Black grip tape applied to top of board
    • Note: Comes pre-assembled and ready to ride right out of the box!
    • Note: Colors and graphics may vary slightly from image
    • Show us your setup! Use #visionskateboard @selectskateshop on your Instagram for a chance to be featured!
    Cart
    Vision Jinx Mini Blue Stain Complete - 8"

    Vision Jinx Mini Blue Stain Complete - 8"

    Regular price $ 99.95
    /

    Shred in style Jinx Mini with the Vision 8" skateboard complete. A favorite graphic from Vision, while the moderate concave profile is perfect for flipping tricks of all kinds or just cruising. Abec 7 bearings carry speed insanely well from the park to the street, and the 101a durometer wheels fend off flat spots with ease.

    • 8" Skateboard Complete from Vision
    • 7-ply Canadian maple construction
    • Moderate concave
    • Moderate pitched and slightly tapered kick tails
    • 5.25" Psycho trucks
    • 53mm 101a Wheels
    • Abec 7 bearings
    • Width: 8"
    • Length: 31.5"
    • Wheelbase: 14.5"
    • Made in USA at our woodshop
    • Note: Black grip tape applied to top of board
    • Note: Comes pre-assembled and ready to ride right out of the box!
    • Note: Colors and graphics may vary slightly from image
    • Show us your setup! Use #visionskateboard @selectskateshop on your Instagram for a chance to be featured!
      Cart
      Vision Original MG Complete Skateboard - 10"x30"
      Vision Original MG Complete Skateboard - 10"x30"

      Vision Original MG Complete Skateboard - 10"x30"

      Regular price $ 165.95
      /

       

      Vision classic Re-Issue made to the exact specifications of the original design and it's still being made by the same company that made them! It's hard to go wrong when the original company is the still making the board from the 80's!

      Wheelbase: 16.25"   

      -Tracker Trucks Axis 161mm Silver

      -Psycho Riser 1/2" Green

      -Psycho Rails Green

      -Bearings Abec 7

      -Blurr Wheels  60mm 96a(Color may vary due to stock availability) Green

      Cart
      Vision Original MG Complete Skateboard - 10"x30"
      Vision Original MG Complete Skateboard - 10"x30"

      Vision Original MG Complete Skateboard - 10"x30"

      Regular price $ 165.95
      /

       

      Vision classic Re-Issue made to the exact specifications of the original design and it's still being made by the same company that made them! It's hard to go wrong when the original company is the still making the board from the 80's!

      Wheelbase: 16.25"   

      -Tracker Trucks Axis 161mm Silver

      -Psycho Riser 1/2" Green

      -Psycho Rails Green

      -Bearings Abec 7

      -Blurr Wheels  60mm 96a(Color may vary due to stock availability) Green

      Cart
      Vision Original MG Green Stain Complete - 8.5"

      Vision Original MG Green Stain Complete - 8.5"

      Regular price $ 99.95
      /

      Shred in Original MG with the Vision 8.5" skateboard complete. A favorite graphic from Vision, while the moderate concave profile is perfect for flipping tricks of all kinds or just cruising. Abec 7 bearings carry speed insanely well from the park to the street, and the 101a durometer wheels fend off flat spots with ease.

      • 8.5" Skateboard Complete from Vision
      • 7-ply Canadian maple construction
      • Moderate concave
      • Moderate pitched and slightly tapered kick tails
      • 5.25" Psycho trucks
      • 53mm 101a Wheels
      • Abec 7 bearings
      • Width: 8.0"
      • Length: 33"
      • Wheelbase: 14.5"
      • Made in USA at our woodshop
      • Note: Black grip tape applied to top of board
      • Note: Comes pre-assembled and ready to ride right out of the box!
      • Note: Colors and graphics may vary slightly from image
      • Show us your setup! Use #visionskateboard @selectskateshop on your Instagram for a chance to be featured!
        Cart