St Patricks

 Tracker Dan Wilkes Raptor Re-issue deck

• 1986 Re-issue
• 10.5" x 31"   
• 17.125" wb
• Front/Rear Wheel wells 
• Made in the USA at our very own woodshop

Tracker replacement or upgrade bushings.  Made with top quality urethane. 90a hardness

Color:  Green transparent Swirl

Kit includes:  2 top small cones & 2 bottom barrel bushings.

For other options of hardness check out the:  Soft Blue 75a & Medium Orange 80a

These are your replacement caps for the Smith Scabs State Knee Pads. Made with a Top of the line formula. Very durable and ready to use.  Just stick them on and they are ready to go. Applied with a heavy duty built-in velcro system. Sold In Sets of 2.

Protect your caps with these Recaps. Fits snugly over our Elite Knee caps.  These are made to fit the Original Elite knee pads.  Its recommended to apply the recap to a new set of Elite knee pads to help extend the life of the caps.  Apply with a double sided tape already adhered to the cap.  Just peel and stick the cap right on the riveted cap.  Sold In Sets of 2.

These are your replacement caps for the Elite II. Made with a Top of the line formula. Very durable and ready to use.  Just stick them on and they are ready to go. Applied with a heavy duty built-in velcro system. Sold In Sets of 2.

Flexible & contoured design provides comfort. Extra thick splint provides ultimate protection. Reinforced double stitching with 3 adjustable velcro straps. Available in matching Elite Knee and Elbow Pads.

Adjustable for snug fit to prevent slippage w/open back butterfly straps. Washable & built for protection and comfort. Available in matching Elite Elbow and Wrist Guards.

Neoprene gasket made to be worn in combination with Smith Elite Knee pads for extra protection and to prevent slippage.

Available in 8 colors!

Surprise! 2022 Hosoi Christmas Limited Hammerhead deck is HAND SCREENED & numbered to ONLY 125.  

We found some in the warehouse- Make sure you snatch it up!

This color way won't be made again.

Made in our very own woodshop-USA.

Construction:

• 7 Ply Hard Rock Maple
• Width: 10.5"
• Length: 31"
• Wheel base: 16"

Schmitt Stix- Tarampula Re-issue deck.  From the original 1st shape offered in 1984. Made with the same presses as Schmitt Stix in 1980's. 

10"x 29.25" 

WB 15.75"

MADE IN THE USA.

Schmitt Stix Ripsaw re-issue Deck-

Originally released in 1987.

10"x30"

WB: 15.5"

MADE IN THE USA.

Schmitt Stix Joe Lopes Crystal Ball Concave Deck- 10"x30"

Features Modern Concave

Kick in the Nose and Tail

Wheelbase: 15.25"

Schmitt Stix Joe Lopes Crystal Ball re-issue deck

Originally released in 1985.

9.875"x31"

WB: 15.5"

Schmitt Stix Joe Lopes BBQ re-issue Deck-

Originally released in 1987.

10.125"x30.625"

WB: 15.5"

MADE IN THE USA.

Schmitt Stix Danger Concave Deck- 10"x30"

Wheelbase: 14.5"

Nose- 6.5"

Tail- 5"

Schmitt Stix classic Re-Issue made to the exact specifications of the original design! Comes in a variety of colors to choose from.

9.125"x29.75"
Wheelbase: 14.5"

Pro Model: Chris Miller

Schmitt Stix re-issue pro model Chris Miller.

Now offering the Classic re-issued Large Chris Miller Dog deck.  Made with the same presses Schmitt stix in 1980's.  Made to the identical shape and size as 1988.

10"x 31.875"  WB 15.5"

Quote:  Chris Millers interview with the Ride Channel, “My Schmitt board was famous for being the first board with an upturned nose that was long. It started that trend towards modern boards. I can't take credit for it. It was going to happen whether Schmitt did it or someone else. But the other side is that Schmitt did do it first. He came to me and said, “I have an idea for your new shape,”  and it was about the mold and all that. At first, I didn’t like it aesthetically, but I was the first person to do backside lipslides on vert and I went from a G&S board with basically no nose—think about coming in from a backside lipslide, where you need a little nose to bring yourself in—to the Schmitt shape, and it was a game-changer for me. I loved that board, and we're only talking four or five inches of nose. If you look at it now, it's a tiny little nose, but then it was crazy-looking.”

Soft 1/8" Risers (Set of 2)

Come in blue, red, green, orange, yellow, purple, pink, and black.

1/8" Risers work with most 1" hardware.

Soft and flexible material.

Soft 1/4" Risers (Set of 2)

Come in blue, red, green, orange, yellow, purple, pink, and black.

1/4" Risers work with most 1" hardware.

Soft and flexible material.

Soft 1/2" Risers (Set of 2)

1/2" Risers work with most 1" hardware.

Soft and flexible material.

Black Friday Special

Magic Mirror Deck- 8.5"x32.5"

Wheelbase- 14.5" 

Made with Canadian Maple.

Handmade right here in our woodshop, California USA

Sold as complete and ready to ride!

The Rasta has very slight concave and has a full kick tail. It measures 34" in length and is a great board for just about anything. The board is not that big so you can take it every where you go and it wont get in the way. Setup with Revenge trucks this board is great for carving and cruising. Has a very quick response which makes for a great city board. Its also great board for making those short runs down to the store or to go check the surf.

Deck Info:

This board is part of the “Meat Loaf” Series. Just like mom used to make except we take the best of what’s leftover in the wood shop to produce this tasty little morsel. Its our little contribution to minimizing waste because every little bit helps. And if that’s not enough the “Meat Loaf” is the first fairly limited edition production board. Why is it fairly limited you ask? That’s because every 6th deck the stringer pattern changes. So more than likely you will never see the same board twice.

Deck Info:

Dimensions: L – 33” * W – 9”
Wheel Base: 25"
Wood: Aspen, Mahogany, Purple Heart, and a mixture of Green, Blue, Red, Yellow, Orange dyed Maple Veneers. The core of this board is 5 ply maple.
Bottom: Natural Maple
Shape: Slight concave, slight camber
Grip: Recycled clear grip material by LUCID GRIP